Visco Oil lubricants Lincoln Nebraska    
 
 

 |  HOME    |  CONTACT  |

 

MATERIAL SAFETY DATA SHEET
Trade Name:  CORE Shredder Oil

I.          MANUFACTURER

VISCO Inc.
14610 Woodstock Blvd,   Waverly   NE  68462
Mailing Address:  P.O. Box 67217,  Lincoln  NE  68506
Office:  402-676-0535    Fax:  402-489-6493
Plant:  402-786-3013      ron@viscoinc.com
Distributed By:  Vanguard Industries Inc.

II.          HAZARDOUS INGREDIENTS

Hazard Determination:  Material is not hazardous as defined by  OSHA.
Hazard Communication Standard, 29CFR1910.1200. Lubricant contains no ingredients listed as carcinogen or potential carcinogen by NTP, IARC, OSHA.
Lubricant contains no ingredients listed on California Prop 65.
Product contains no WHMIS controlled substances

Non-Hazardous Ingredients:  100% synthetic hydrocarbon, CAS # (trade secret)
This material is not known to be hazardous.

III.         PHYSICAL DATA
Boiling Point:  650-790o F                                                                       Specific Gravity:           .895
Vapor Density:  n/a                                                                   % Volatile By Volume.:   nil
Appearance:  light brown                                                           Melting Point:  - 110O  F
Vapor Pressure:  nil                                                                   Solubility in Water:  nil
Evaporation Rate:  n/a                                                               PH:  neutral
Volatile Organic Content: 0 gm./liter

IV.        FIRE AND EXPLOSION DATA
Flash Point:  380O F COC
Auto Ignition Temperature:  555 O F       
Flammable Limits in Air:  n/a
Extinguishing Media:  Use water spray, dry chemical, foam, or carbon dioxide.
Special fire fighting procedures:  Water or foam may cause frothing.  Use water to keep containers cool.  Water spray may be used to flush spills.
Unusual Fire / Explosion Hazard:  Products of combustion may contain carbon monoxide, carbon dioxide, or other materials.  DO NOT ENTER ENCLOSED OR CONFINED AREA WITHOUT PROPER PROTECTIVE EQUIPMENT, INCLUDING RESPIRATORY EQUIPMENT.

V.         HEALTH HAZARD INFORMATION
Inhalation:  No volatiles, inhalation is unlikely route.  Acute inhalation in rats LC50 MG/LITER, greater than  2.0 (non-toxic)
Skin Contact:  Repeated exposure can cause irritation.  Recommend using impenetrable gloves. Wash off with soap and water.  Primary skin irritation in rabbits:  Average score:  1.88 (mild irritant)
Skin Absorption:  Unlikely.  Use protective gear during continued or oxtreme exposure.   
Eye Contact:  Can cause irritation.  Use safety glasses at all times, goggles when handling in overhead or when agitating.  Eye irritant in rabbits.
Washed – mild irritant.  Unwashed – minimal irritant.
Ingestion:  Oral LD50 (rat at  5000 mg/kg  no deaths).

           

MATERIAL SAFETY DATA SHEET

 

Trade Name:  GBC Shredmaster Shredder Oil

 (Page 2 of 2)

VI.        EFFECTS OF OVEREXPOSURE

Acute Overexposure:  Potential skin and eye irritant.
Chronic Overexposure:  Product may cause irritation to eyes, lungs, or skin after repeated exposure.  Overexposure may cause central nervous system

VII.       EMERGENCY AND FIRST AID PROCEDURES

Eyes:  Wash with water for 15 minutes.  If irritation persists, consult physician.
Skin:  Use protective clothing for sensitive skin, wash with soap and
Inhalation:  Remove victim to fresh air and provide oxygen if breathing is difficult..
Ingestion:  If large amounts are ingested, do not induce vomiting.  Consult physician as gastric lavage may be indicated.

VII.       REACTIVITY DATA

Conditions Contributing to Instability:  Generally stable, keep away from heat sources and open flame. 
Incompatibility:  Keep away from strong oxidizers.
Hazardous Decomposition Products:  Generally none, except as carbon dioxide during incomplete combustion.  Conditions contributing to hazardous polymerization:  None.

VIII.       DISPOSAL, SPILL and LEAK PROCEDURES
Aquatic Toxicity:  None known
Waste Disposal Method:  Use absorptive material and dispose at professional disposal complying with state, federal, and local regulations.
If Material is Spilled or Released:  Contain spill immediately in smallest area possible.  Soak up with oil absorbing material and dispose as regulated. 
Neutralizing Chemicals:  None indicated.

IX.        SPECIAL PROTECTIVE INFORMATION
Ventilation::  Normal shop ventilation.
Respiratory:  None normally required except as noted in section  IV.
Eye:  Always wear safety glasses.  Chemical goggles if danger of splash or drip exists.
Gloves:  Recommend impervious type..
HMIS Rating:  Health 1, Flammability 1, Reactivity 0, Personal Protection A.

X.         SPECIAL PRECAUTIONS / STORAGE
Lubricant contains no ingredients listed as carcinogen or potential carcinogen by NTP, IARC, OSHA.
Lubricant contains no ingredients listed on California Prop 65.
Handling or Storage Requirements:
DOT Label:  Not Regulated    OSHA Label:   Not Regulated
Product is Class IIIB Combustible
Liquid per NFPA Code No. 30-1984 Store / Handle accordingly.
Shelf life of product is 1 year.

MSDS Updated:  7/15/2009
Responsible for  MSDS:  Ron Isaacson:   (402) 676-0535  
VISCO Inc.,  PO Box 67217,  Lincoln NE 68506